Your Emergency Vehicle Super Source
Accessories
Overhead Dome light (LED) Overhead Dome light (LED)
  • Lightweight and easy to mount
  • 3-position switch (white / off / red)
  • Low amp draw
  • Using red at night reduces officer targeting and reduces eye fatigue
Quad Accessory Outlet Box with Lighted On / Off switch Quad Accessory Outlet Box with Lighted On / Off switch
  • (1) double USB port and (2) 15A cigar plug receptacles
  • Green status indicator light on USB ports
  • Fully enclosed black ABS plastic box with mounting holes through the case eases installation in tight spaces
  • Attached rubber covers on each outlet aid in keeping receptacles clear of debris and / or moisture
5-Output Switch Plate with USB 5-Output Switch Plate with USB

Needs description.

Triple Accessory Outlet Box (Cigar Plug) Triple Accessory Outlet Box (Cigar Plug)
  • Three 15A accessory outlets protected by a 15A glass fuse located in the cigar plug.
  • Cigar plug facilitates easy transfer / portability.
  • Fully enclosed black ABS plastic box with flange mount.
  • Attached rubber covers on each outlet aid in keeping receptacles clear of debris and / or moisture.
Triple Accessory Outlet Box (Constant Hot) Triple Accessory Outlet Box (Constant Hot)
  • Three 15A accessory outlets protected by a 15A automatic resetting circuit breaker on back of case.
  • Fully enclosed black ABS plastic box with flange mount.
  • Attached rubber covers on each outlet aid in keeping receptacles clear of debris and / or moisture.
Triple Accessory Outlet Box with Lighted On / Off Switch Triple Accessory Outlet Box with Lighted On / Off Switch
    Three 15A accessory outlets protected by an in-line glass fuse.
  • Lighted on/off switch powers all outlets
  • Fully enclosed black ABS plastic box with mounting holes through the case eases installation in tight spaces.
  • Attached rubber covers on each outlet aid in keeping receptacles clear of debris and / or moisture
Clearance
4-Diode Multi-Mount Lighthead 4-Diode Multi-Mount Lighthead

Use the standard U bracket with single bolt mount or use an L bracket. Using the U bracket / single bolt mount allows for swivel and rotation.

Cover all angles with this versatile option!

pdf/SQ4-4-LED-Multi-Mount-Lighthead-Spec-Sheet.pdf
XL09B 9 Diode Xtreme Linear Surface Mount XL09B 9 Diode Xtreme Linear Surface Mount

A heavy duty Xtreme linear surface mount that has become known as a work-horse in the industry.

pdf/XL09B-Xtreme-LED-Light-Spec-Sheet.pdf
XL6B 6-Diode Xtreme Linear Surface Mount XL6B 6-Diode Xtreme Linear Surface Mount

Xtreme linear optics provide a previously unrivaled strobe punch. The XL6 can be mounted virtually anywhere with its super low profile and small footprint.

XLED18B 18 Diode Xtreme Linear Surface Mount XLED18B 18 Diode Xtreme Linear Surface Mount

18 diodes and Xtreme linear optics provide amazingly effective coverage.

The XLED18B is perfect for those applications where space is not limited.

Digital Switch Panels
9-Button Digital/Programmable Switch  Panel 9-Button Digital/Programmable Switch Panel

Fully programmable pursuit mode capable digital switch panel. Top 3 switches can be programmed to function like a 3 position slider allowing for quick pursuit functions. Sixth switch can be programmed to act as a momentary and 2 hidden functions for backlight dim and timer (1-25 seconds).  Measuring barely 2" thick, and with dimming capability, this is a must for undercover vehicles! 2 piece adjustable/swivel bracket included.

6-Button Digital/Programmable Switch Panel 6-Button Digital/Programmable Switch Panel

The slimmest, stealthiest and smartest switch panel available! It actually performs a self diagnosis each time it is powered to ensure optimum performance! Programming options include a master pursuit switch program option that allows the 990 to perform multiple functions simultaneously. 30 title legend sheet and 2 piece swivel style bracket included.

Emergency Beacons
12-Diode Emergency Beacon 12-Diode Emergency Beacon

12 diode permanent mount beacon available in amber, blue, green, red and clear (white)

8-Diode LED Beacon 8-Diode LED Beacon

LOW PROFILE - 8 diode - SAE J845 - Permanent mount - 12~24VDC

Magnet mount (pictured) also available PN# B16-12131-00 

pdf/B16-Emergency-Beacon-Spec-Sheet.pdf
3-Diode Economy LED Beacon 3-Diode Economy LED Beacon

3 diode economy beacon - permanent mount - 11~110VDC

Magnet mount also available PN# JB106L3-D0A-C 

pdf/JB106L3-Warning-Beacon-Spec-Sheet.pdf
3-Diode Economy LED Beacon 3-Diode Economy LED Beacon

3 diode economy beacon - permanent mount - 11~110VDC

Magnet mount also available PN JB130L3-D0A-C

pdf/JB130L3-Warning-Beacon-Spec-Sheet.pdf
6-Diode Economy LED Beacon 6-Diode Economy LED Beacon

6 diode economy beacon - permanent mount - 12~110VDC

Magnet mount also available PN# JB45L6-D0A-C

pdf/JB45L6-Warning-Beacon-Spec-Sheet.pdf
4-Diode LED Beacon 4-Diode LED Beacon

SAE J845 and Class 1 certified - 4 diode (3W) - Permanent Mount - 12~24VDC

Magnet mount also available PN# B17-12111-00

pdf/B17-Emergency-Beacon-Spec-Sheet.pdf
10-Diode LED Beacon 10-Diode LED Beacon
SAE J845 & Class 1 certified - 10 diode - permanent mount - 12~24VDC

 

Magnet mount also available PN# B14-12235-00-C

12-Diode LED Beacon 12-Diode LED Beacon

SAE J845 AND CA-XIII certified - 12 diode - permanent mount

Magnet mount also available PN# B15-22331-00 

instructions/1075636381.jpg
Headlight / Tail Light Flashers
Plug & Play Dodge Charger Headlight Flasher Plug & Play Dodge Charger Headlight Flasher

This is the latest addition to our patented plug & play flasher line. Our patented method freezes the headlight shutter in the wide open / high beam mode without compromising the Can BUS system or Body Control Modules.

Plug & play design facilitates quick and easy installation and as an added convenience we\'ve included and auxiliary lead that allows the flasher unit to act as a \"hub\" for other front end accessory lighting.

 YEAR MODEL: 2015+ 

Plug & Play Dodge Charger Tail Light Flasher Plug & Play Dodge Charger Tail Light Flasher

This flasher alternates the rear center panel and tail lights, a perfect solution for unmarked as well as marked PPV\'s.

There are other way to achieve this effect but why risk damage to Body Control Modules and the Can BUS system when Brooking\'s technology assures zero negative effects to either? Plug & play design facilitates quick and easy installation, and as an added convenience we\'ve included and auxiliary lead that allows the flasher unit to act as a \"hub\" for other rear end accessory lighting.

FL-8ORFiP: 2011 - 2014

FL-8ORFiP-2: 2015+ 

 

Plug & Play Ford Interceptor Tail Light Flasher (sedan & utility) Plug & Play Ford Interceptor Tail Light Flasher (sedan & utility)

Flash the factory tail lights in any 2013+ year model Ford sedan or utility with our 2O series flasher (product codes unique to sedan and utility).

Plug & play design facilitates quick and easy installation and as an added convenience we\'ve included and auxiliary lead that allows the flasher unit to act as a \"hub\" for other rear end accessory lighting.

Utility/Explorer: FL-2OFiU      Sedan: FL-2OFiS

THESE UNITS WORK IN ALL YEAR MODEL FORD PPV (SEDAN AND UTILITY).

WANT TO REALLY MAKE THE TAIL-LIGHTS POP? FORD OPTION 86T ACCOMODATES OUR TALO6 TWIST-LOCK L.E.D. HIDE-AWAYS. THE FL-20 WILL FLASH THE BRAKE LIGHTS, OPTION 86T CUT-OUT ALLOWS TAL0\'S TO FLASH THE REVERSE LIGHTS. 

Plug & Play Ford Interceptor Headlight Flasher (sedan & utility) Plug & Play Ford Interceptor Headlight Flasher (sedan & utility)

In 2013 Brooking took on the challenge and succeeded with flashing Ford\'s new projector beam headlights. Our method freezes the headlight shutter in the wide open / high beam mode without compromising the Can BUS system or Body Control Modules.

Plug & play design facilitates quick and easy installation and as an added convenience we\'ve included and auxiliary lead that allows the flasher unit to act as a \"hub\" for other front end accessory lighting.

UTILITY: 2013 - 2015 year models only

SEDAN: 2013+ 

Hideaway Lights
6-Diode Ford Interceptor Hideaway Light Kit 6-Diode Ford Interceptor Hideaway Light Kit

This super-bright twist-lock hideaway light is designed to fit the headlamps and tail-lamps of the Ford Interceptor PPV\'s. An optical lens produces maximum output and the twist-lock design facilitates quick and easy installation.

An optional L bracket is also available for surface mounting or hanging from a headliner. See specifications sheet for Ford year models and fit.

Available in both solid and split colors.

pdf/TAL06-Hideaway-Light-Spec-Sheet.pdf
6-Diode LED Hideaway Light with Surface Mount Kit 6-Diode LED Hideaway Light with Surface Mount Kit

The convenient rubber grommet base of the PAL06 eases installation and is less invasive than our HAL06 or HAL09 Hideaway Light Kits (the PAL has no screws).

Use as a traditional hideaway light within a lamp housing, or surface mount them using the black bezels that come standard with each 2-head kit. Chrome and white bezels are also available as an upgrade.

Dual modes allow isolation of colors in split color modules, use white for reverse / steady burn and red, blue or amber for warning. Available in both solid and split colors. PAL06DF-W/W features reverse / steady burn feature for all 6 diodes.

Available in solid colors & split color combinations

5 YEAR WARRANTY

pdf/PAL06-Hideaway-Light-Spec-Sheet.pdf
6-Diode LED Hideaway Light with Surface Mount Kit 6-Diode LED Hideaway Light with Surface Mount Kit

The unique design of the HAL06 results in massive output in the right situations. The angle of the diodes promotes maximum reflection off of the reflector in the lamp housing.

Like the PAL06 and HAL09, these can be surface mounted using the black bezels that come standard with each 2-head kit. Chrome and white bezels are also available as an upgrade.

Available in both solid and split colors.

pdf/HAL06-Hideaway-Light-Spec-Sheet.pdf
9-Diode LED Hideaway Light with Surface Mount Kit 9-Diode LED Hideaway Light with Surface Mount Kit

Get 360 degree output with the innovative HAL09 series. The 9 diodes are positioned on a pyramid 3x3x3 resulting in maximum output in all directions.

Surface mount them using the black bezels that come standard with each 2 head kit. Chrome and white bezels are also available as an upgrade.

pdf/HAL09-9-Diode-Hideaway-Light-Spec-Sheet.pdf
Installers Toolbox
Fuse Block with Indicator Lights Fuse Block with Indicator Lights

This heavy duty marine grade fuse block includes fuse status indicator lights and a clear poly cover. It is available in three models: 4 gang, 6 gang & 10 gang.

(FB10-PLC pictured)

Fuse Block with Grounding Pad Fuse Block with Grounding Pad

This heavy duty marine grade fuse block with grounding pad and clear poly cover is available in 3 models: 8 gang, 10 gang & 12 gang. (insert appropriate number ex: FB10-GPC)

(FB12-GPC pictured)

Manual Reset Circuit Breaker Manual Reset Circuit Breaker

This manual reset circuit breaker is available in four models - 50 amp, 80 amp, 100 amp, and 150 amp.

Light Sticks
Commander XL6 Emergency Light Sticks Commander XL6 Emergency Light Sticks

A bruiser in its division, the Commander has been a stalwart in the industry for years. It\'s heavy duty construction combined with Xtreme linear optical light heads have provided years of highly effective and trouble free service. Waterproof connectors make maintenance and / or reconfiguration a breeze. Each unit has a variety of warning patterns and arrow patterns, brackets & controller sold separately.*

*Available in 2, 4, 6 & 8 head configurations 

*Brackets are sold individually as # required varies by length

*SW610-TA is an option but is not necessary 

pdf/Commander-XL6-Light-Stick-Spec-Sheet.pdf
RayZR Light Stick RayZR Light Stick

Razor thin and lightweight and the next BIG thing. The RayZR is easy to work with and accommodates just about every need.

  • Push Bumper
  • Rear Deck
  • Rear Headliner
  • Rear Spoiler of Ford Interceptor Utility (pictured)
  • Frame Rails*
  • Side Windows 

It is a weatherproof light-stick that is razor thin and lightweight, put it anywhere using several different bracket options. Keep the rear window clear with our Ford Interceptor specific pod that mounts to the top of the rear spoiler with double sided body panel tape for a quick easy OEM look!  *When used on the frame rails traffic patterns can be utilized to direct traffic around an accident scene.

pdf/RayZR-Light-Stick-Spec-Sheet.pdf
Lightheads
Wide Angle 6-Diode Multi-Mount Lighthead Wide Angle 6-Diode Multi-Mount Lighthead

Brooking’s universal and affordable option to effective intersection lighting has arrived.

The adjustable swivel mount on the Mirror Mount version of our AL6 allows the wires to pass through the top of a bracket which is concealed by a screw-on cover. This results in an easy, clean looking installation under the side mirrors of most vehicles.

Though the AL6M is promoted as an affordable and universal option for side mirror mount, the applications are not limited to this area of the vehicle only.

Available Colors: Amber, Blue, Red and White (solid colors only at this time)

pdf/AL6-M-Warning-Lamp-Spec-Sheet.pdf
Wide Angle 6-Diode Surface Mount Lighthead Wide Angle 6-Diode Surface Mount Lighthead

The new AL6 arc light provides the widest light spread of any Brooking product.

The curved lens and strategically positioned two-piece linear optics provide nearly 180 degree coverage. Each unit comes standard with a black bezel. Chrome and white bezels coming late 2016. (Pre-Order Information)

Available Colors: Amber, Blue, Red and White (solid colors only at this time)

pdf/AL6-S-Warning-Lamp-Spec-Sheet.pdf
Low Profile 6-Diode Multi-Mount Lighthead Low Profile 6-Diode Multi-Mount Lighthead

This unique new offering from Brooking is compact, versatile and BRIGHT. Measuring just 0.62" in height and just over 1" in depth allow for a multitude of applications.

Aside from the aesthetics, another unique feature is the variety pack of tabs and brackets included with each light at no additional charge. These tabs / brackets, made of super-strong composite material, mate with holes in the back of the base allowing the light head to be hung from the sides or top or pedestal mounted from the bottom.

Available Colors: Amber, Blue, Red and White (solid colors only at this time)

pdf/ES6-Lighthead-Spec-Sheet.pdf
Xtreme Thin 6-Diode Surface Mount Lighthead Xtreme Thin 6-Diode Surface Mount Lighthead

Never before has a light this small packed a punch so big! 

  • 2nd Generation Xtreme Linear optics
  • Xtremely thin design allows for installation in tight spaces
  • Colored bezels provide a near-factory appearance until illuminated
  • Available in solid colors only. The compact size wil not allow for split colors or split flashing (3x3).
pdf/XT6-6-LED-Lighthead-Spec-Sheet.pdf
Xtreme Thin 12-Diode Single & Dual Color Lighthead Xtreme Thin 12-Diode Single & Dual Color Lighthead

The XT12 is the latest in our rapidly growing line of low-profile, super-bright surface mount lightheads.

  • Xtreme linear optics maximizes output
  • Low profile design provides a factory look
  • Xtreme thin design facilitates new, unique applications.
  • Available in single color (all 12 diodes same color) or dual color (6x6).
  • Dual color units: Run one color or the other, or alternate between both.
  • Black bezel inlcuded at no additional charge - white and chrome also available as an upgrade.
pdf/XT12-Lighthead-Spec-Sheet.pdf
Round 3-Diode Surface Mount Lighthead Round 3-Diode Surface Mount Lighthead

This versatile light head can be used as a surface mount or hide-away. For surface mount applications use the black bezel that comes standard with each unit or upgrade to chrome or white. For hide-away applications simply discard the snap-on bezel and insert into a 1\" hole drilled in a lamp housing.

The optical lens makes this a super-effective hide-away option when mounted to the side wall of larger lamp housings (aiming outwards instead of facing into the reflector inside the housing).

  • SAE J595 Class 1
  • CA XIII
  • 5 year warranty 
pdf/M53-LED-Light-Spec-Sheet.pdf
Super Thin 3-Diode Surface Mount Lighthead Super Thin 3-Diode Surface Mount Lighthead

The little brother of the ST6, a 3-diode super thin surface mount with virtually unlimited applications. 

  • SAE Class 1
  • CA XIII
  • 5-Year Warratny 
pdf/ST3-Directional-Warning-Lamp-Spec-Sheet.pdf
Mini Stealth 6-Diode Surface Mount Lighthead Mini Stealth 6-Diode Surface Mount Lighthead

The slim design and massive output has made the MS6BS an all time best seller for Brooking.

6 diodes in a super slim aluminum housing provide the output necessary to keep our public safety officers safe on the road.

Also available with vertical optics.

pdf/MS6BS-Surface-Mount-LED-Light-Spec-Sheet.pdf
Mini Stealth 6-Diode Surface Mount w/ Vertical Optics Mini Stealth 6-Diode Surface Mount w/ Vertical Optics

The popular MS6BS light head with vertical optics. When mounted vertically the light spread is increased 200% versus a horizontal optic model mounted vertically. A light head with horizontal optics that is mounted vertically will not meet any SAE requirements. This model is perfect for the sides of push bumpers, partition wings, license plate sides or anywhere that space for a horizontal mount is lacking.

Also available with horizontal optics.

pdf/MS6BS-Surface-Mount-LED-Light-Spec-Sheet.pdf
Programmable 12-Diode Surface Mount Lighthead Programmable 12-Diode Surface Mount Lighthead

A stacked version of the ID6 Offset diodes provide superior off-axis (180 degree!) output and programming features allow for cruise / marker lighting that is over-ridden by warning when activated.

The ID26 is featured in the video below at about the 2:00 mark, although at first incorrectly identified as an ID6.

pdf/ID26-Programmable-12-Diode-Lighthead-Spec-Sheet.pdf
Programmable 6-Diode Surface Mount Lighthead Programmable 6-Diode Surface Mount Lighthead

Offset diodes in positions 1 & 6 provide the highly coveted off-axis (180 degree!) output for safer intersection clearance and programmability allows it to run as a cruise light (50% power) until warning mode is activated.

Use with our FI-FIS fender inserts!

The 12-diode version of this light, the ID26, is featured in the video below at about the 2:00 mark, although incorrectly identified as an ID6.

pdf/ID6-Programmable-6-Diode-Lighthead-Spec-Sheet.pdf
Super Thin 6-Diode Surface Mount Lighthead Super Thin 6-Diode Surface Mount Lighthead

The one of a kind ST6 is a game changer! Gone are the days of cutting holes in expensive body panels and / or interior trim, these light heads are so thin and accommodating they can be used just about anywhere.

pdf/ST6-Super-Thin-Surface-Mount-Lighthead-Spec-Sheet.pdf
Mini Stealth 12-Diode Surface Mount Lighthead Mini Stealth 12-Diode Surface Mount Lighthead

The popular MS6 series in a double stack model! 12 high intensity diodes and 3 different flash modes make this a one of a kind light. 3 flash modes allow the user to choose from top/bottom, side/side and criss/cross patterns.

pdf/MS26BS-12-Diode-Surface-Mount-Lighthead-Spec-Sheet.pdf
Mini Stealth 3-Diode Multi-Mount Lighthead Mini Stealth 3-Diode Multi-Mount Lighthead

The MS3BH multi - mount gives the user 3 different options for mounting: 

  1. Lip mount, no holes drilled mount on any surface with an exposed edge
  2. Permanent mount
  3. Super sticky adhesive pads.

The video below shows two MS6BH lights installed on one of our demo vehicles at about 0:35.

pdf/MS3BH-3-Diode-Multi-Mount-Lighthead-Spec-Sheet.pdf
Mini Stealth 3-Diode Surface Mount Lighthead Mini Stealth 3-Diode Surface Mount Lighthead

3 diodes have never provided such big output. The MS3BS is small enough to fit just about anywhere but do not be fooled, the output is anything but small.

pdf/MS3BS-Mini-Stealth-Surface-LED-Light-Spec-Sheet.pdf
Mini Stealth 6-Diode Multi-Mount Lighthead Mini Stealth 6-Diode Multi-Mount Lighthead

The MS6BH multi - mount gives the user 3 different options for mounting:

  1. Lip mount, no holes drilled mount on any surface with an exposed edge
  2. Permanent mount
  3. Super sticky adhesive pads

The video below shows two MS6BH lights installed on one of our demo vehicles at about 0:35.

pdf/MS6BH-6-Diode-Multi-Mount-Lighthead-Spec-Sheet.pdf
Mini Bar Lights
Dual Color Extended 72-Diode Micro-Bar Dual Color Extended 72-Diode Micro-Bar

This is the dual color version of our popular extended Micro-Bar Mini Bar Light.

Available with cigar plug / magnet mount or hardwire with 4 bolt permanent mount.

Colors: Amber, Blue, Red, White (solid and combinations)

SAE certified 

pdf/MB-EXD-Mini-Bar-Light-Spec-Sheet.pdf
Extended 42-Diode Micro-Bar Extended 42-Diode Micro-Bar

An extended version of the original Micro-Bar. We stretched it out length-wise allowing for a few more light modules to produce even more output than the original.

Available with cigar plug / magnet mount or hardwire with 4 bolt permanent mount.

Colors: Amber, Blue, Red, White (solid and combinations)

SAE certified 

Also available in a dual color version.

pdf/MB-EX-Mini-Bar-Light-Spec-Sheet.pdf
Micro-Bar 30-Diode Mini Light Bar Micro-Bar 30-Diode Mini Light Bar

The name says it all! Never mind mini, this new and unique item is micro size!

This unique new offering from Brooking measures less than 1" from top to bottom allowing this super bright bar to be stored in a glove compartment or brief case / duty bag when not in use.

30 super high intensity diodes behind new innovative optics provide superior output while the unique design allows for multiple applications. Each unit comes standard with 4 magnet mount (alternative mounting options available for additional charge).

Cutting off cigar plug will not void warranty.

For an extended version of this product, check out our MB-EX extended micro-bar.

pdf/MB30-Mini-Bar-Light-Spec-Sheet.pdf
Economy 18-Diode Mini Bar Light Economy 18-Diode Mini Bar Light

This 6 head unit features ReFlector type optics behind a fluted polycarbonate dome. Don’t let the lesser head count fool you, the G6 is a force to be reckoned with. Each unit comes standard with 4 magnet mount, alternative mounting options available for additional charge.

Cutting off cigar plug will not void warranty.

pdf/G6-Mini-Bar-Lights-Spec-Sheet.pdf
Falcon 30-Diode Mini Bar Light Falcon 30-Diode Mini Bar Light

The Falcon FE3P minibar is another alternative to the typical “breadbox” mini bar light.

The low profile design and impressive 360 degree output makes the Falcon the new standard for the public safety marketplace. 2 button cigar plug for easy on/off and flash pattern selection, 4 magnet mount standard, alternative mounting options available for additional charge.

Cutting off cigar plug will not void warranty.

Check out this light's big brother, the Falcon F84P.

pdf/Falcon-FE3P-Spec-Sheet.pdf
Falcon 40-Diode Mini Bar Light Falcon 40-Diode Mini Bar Light

The Falcon F84P minibar is the alternative to the typical “breadbox” mini bar light. It features our Xtreme linear optics and 40 diodes of LED lighting, in addition to a 2 button cigar plug for easy on/off and flash pattern selection.

4 magnet mount is standard, alternative mounting options available for additional charge.

Cutting off cigar plug will not void warranty.

For a more economical choice, check out our Falcon FE3P Mini Bar Light.

pdf/Falcon-F84P-Spec-Sheet.pdf
Prisoner Transport Equipment
Ford Interceptor Utility Rear Door Skins Ford Interceptor Utility Rear Door Skins

Vacuum formed ABS door skins cover the factory door panel eliminating the time consuming removal of the factory door panel and electric window assembly.

This product will fit utility model Ford Interceptors from the year 2013+

Ford Interceptor Sedan Rear Door Skins Ford Interceptor Sedan Rear Door Skins

Vacuum formed ABS door skins cover the factory door panel eliminating the time consuming removal of the factory door panel and electric window assembly.

This product will fit sedan model Ford Interceptors from the year 2013+

Ford Interceptor Sedan Rear Window Bars Ford Interceptor Sedan Rear Window Bars

Hot rolled powder coated steel window bars protect against kick-outs while the horizontal design improves driver’s visibility and are less aggressive looking to citizens.

This product will fit sedan model Ford Interceptors from the year 2013+

Dodge Charger Rear Window Bars Dodge Charger Rear Window Bars

Hot rolled powder coated steel window bars protect against kick-outs while the horizontal design improves driver’s visibility and are less aggressive looking to citizens.

This product will fit Dodge Chargers from the year 2011+

Dodge Charger Prisoner Transport Seats Dodge Charger Prisoner Transport Seats

Reduce the spread of pathogens by simply wiping down or rinsing the seat after an incident. The innovative contoured design provides much needed space resulting in easier loading and unloading of detainee. Add a set of PT-SBE seat belt extensions for the complete package.

This product will fit Dodge Chargers from the year 2011+

Ford Interceptor Utility Prisoner Transport Seats Ford Interceptor Utility Prisoner Transport Seats

Reduce the spread of pathogens by simply wiping down or rinsing the seat after an incident. The innovative contoured design provides much needed space resulting in easier loading and unloading of detainee. Add a set of PT-SBE seat belt extensions for the complete package.

This product will fit utility model Ford Interceptors from the year 2013+

Ford Interceptor Sedan Prisoner Transport Seats Ford Interceptor Sedan Prisoner Transport Seats

Reduce the spread of pathogens by simply wiping down or rinsing the seat after an incident. The innovative contoured design provides much needed space resulting in easier loading and unloading of detainee. Add a set of PT-SBE seat belt extensions for the complete package.

This product will fit sedan model Ford Interceptors from the year 2013+

Dodge Charger Rear Door Skins Dodge Charger Rear Door Skins

Vacuum formed ABS door skins cover the factory door panel eliminating the time consuming removal of the factory door panel and electric window assembly.

This product will fit Dodge Chargers from the year 2011+

Rooftop Lightbars
Legion FIT Series Economy Lightbar Legion FIT Series Economy Lightbar

The perfect lightbar for the tight budget. Simplified software has less functions (on/off, flash pattern change and synch), takedowns, alley lights and traffic arrows have all been omitted resulting in an extremely effective yet affordable rooftop option. 

 

  • SAE J845
  • CA XIII amber
  • 5 year warranty 

 

pdf/Legion-Fit-Series-Police-Lightbar-Spec-Sheet.pdf
Legion Lightbar Legion Lightbar

The Legion is a high performance, competitively priced police lightbar with a choice of two different types of modules. For the most cost effective solution, Brooking recommends the 3-diode ReFlector type modules in the inboard positions, and the 6-diode D-Fuser type in the corner positions.

The full D-Fuser linear style is available as an upgrade. Top panels remove easily and allow full access to the interior of the lightbar, making field service easier and faster than ever.

These polycarbonate panels are UV stabilized with no cracking or discoloring even in the toughest conditions. A black polycarbonate base on a rigid aluminum platform ensures years of trouble-free service.

Dual Color Torrent Light Bar Dual Color Torrent Light Bar

Patented color changing technology - often imitated, never duplicated.

Brooking pioneered the dual color movement using patented technology. This innovative technology tells a single diode which colors to fire whereas other manufacturing methods involve extra diodes which of course increase price. Change rear inboard modules from warning colors (red or blue) to amber for traffic control resulting in significantly improved roadside safety.

instructions/1898864120.jpg
Torrent Light Bar Torrent Light Bar

Quickly becoming one of the more popular options on the market today, the Torrent has taken public safety by storm.

Packed full of Xtreme linear LED modules for maximum wide angle output, the diode count leaves competitors in the dust.

A fully loaded 49” bar complete with dual 9 diode LED take downs and dual 3 diode alleys boasts a total diode count of 156!

An extruded aluminum chassis provides rigid support and shock absorption without sagging / bending, while the low profile design reduces wind resistance.

Compare this with other lightbars and you’ll see that the Torrent is in a class by itself.

Composite mount is standard (not shown in spec sheet)

instructions/920688627.jpg
Siren & Light Controllers
100W Hand Held Siren / Amplifier with Lighting Control 100W Hand Held Siren / Amplifier with Lighting Control

100W hand-held siren / light controller

pdf/S03-Police-Siren-Spec-Sheet.pdf
Carson Commander Siren Carson Commander Siren

Designed to power one or two 100-watt speakers, the SC-409 Commander includes a 6 position rotary switch including the new Cycler setting which allows the operator to select the Horn Ring Cycler 2 (HRC2) mode from the rotary switch.

There are also two override membrane push button switches for Manual and Air Horn control. A pursuit ready lever/slide switch for up to 60 amps of primary light control has the flexibility to be progressive, non-progressive, or partially progressive, tie auxiliary switches to programmed positions on the lever/slide switch and automatically run the siren tones.

The siren is LED backlit and the auxiliary switches turn red when activated. The noise canceling microphone has P.A. override in all positions except Radio with a face mounted volume control knob. The Siren Cutout connects to the door switch and automatically disables the siren when the driver\'s door opens.

The siren is installed using detachable connectors with screw-down terminals for all connections except the lever/slide switch, which utilize heavy-duty screw-down terminals. Each output is individually fused and all fuses are externally accessible.

As with all Carson Sirens products, the Commander siren is backed by a no-hassle 5-year limited warranty.

pdf/SC-409-Commander-Siren-Spec-Sheet.pdf
Speakers
100 Watt Speaker 100 Watt Speaker

Brooking\'s powerhouse 100W compact speaker designed for behind the grill mount. Bail bracket and hardware included, inquire for vehicle specific mounts.

Switch Boxes
7-Function Switch Box 7-Function Switch Box

(6) 20A capable switches perform seven functions. The last switch is a 3 position jogger switch (on / off / momentary). Ideal for changing flash patterns on the fly. LED backlighting, 40 title adhesive legend sheet, bail bracket included.

10-Function Switch Box 10-Function Switch Box

(3) 40A capable slide positions for pursuit mode set up and 6 illuminated rocker switches fused at 20 amps. Last rocker switch is a 3 position jogger switch (on / off / momentary). LED backlighting, 40 title adhesive legend sheet, and bail bracket included.

5-Function Switch Box 5-Function Switch Box

5 switches fused at 20 amps, protected by covered blade fuses in back of the box. LED backlighting and illuminated TSW switches. Bail bracket and 30 title adhesive legend sheet and extra tiles.

6-Function Switch Box 6-Function Switch Box

This switchbox will handle anything you can throw at it! First switch is 40A capable protected by its own relay and circuit breaker. Remaining 5 switches are fused at 20 amps (protected blade fuses in back of box). 40 title adhesive legend sheet and extra tiles provided. Bail bracket included.

Switch Plates
6 Switch Plate with 3 Position Slide Switch 6 Switch Plate with 3 Position Slide Switch

A “plate” version of our popular BR-970S Switch Box, the SP-970S features 6 lighted rocker switches and a progressive 3 position slide switch. The last switch is a 3 position switch (on/off/ momentary).

2-Outlet 3 Carling Switch Plate 2-Outlet 3 Carling Switch Plate

Needs description.

4 Carling Switch Plate w/Progressive Slide Switch, Double USB Port, Momentary Push Button 4 Carling Switch Plate w/Progressive Slide Switch, Double USB Port, Momentary Push Button

Needs description.

3-Switch Panel 3-Switch Panel

The BR-935 includes two illuminated on/off switches and one momentary switch for quick pulse/momentary applications like flash pattern change.

Switch Plate<br>(6, 8, or 10 switch) Switch Plate
(6, 8, or 10 switch)

Lighted rocker switches with LED backlighting. Designed to fit most major brand consoles. 40 title adhesive legend kit included.

Available in 6, 8, 9, or 10-switch configuration. The SP-10SW is pictured.

2-Outlet Switch Plate<br>(4 or 6 switch) 2-Outlet Switch Plate
(4 or 6 switch)

6 rocker switches and 2 individually switched 12V outlets with LED backlighting. Designed to fit most major brand consoles. 40 title adhesive legend kit included.

Available with 4 or 6 switches, the SW-6SW20 is pictured.

6 Carling Switch Plate 6 Carling Switch Plate

6 carling style lighted switches with LED backlighting. Designed to fit most major brand consoles. 40 title adhesive legend sheet included.

3-Outlet 6 Carling Switch Plate w/Progressive Slide Switch 3-Outlet 6 Carling Switch Plate w/Progressive Slide Switch

3 position pursuit slider switch, 6 carling style lighted switches, 3 individually switched 12V outlets. LED backlighting for legends/titles. One hot-wire runs this entire unit! Designed to fit most major brand consoles, 40 title legend sheet included.

Visor Lights
12 Diode Dash/Deck Light 12 Diode Dash/Deck Light

Use it as a dash light or deck light via multiple mounting options. Xtreme linear optics provide an unrivaled punch and the versatilty means almost unlimited applications.* Mount it high and tight with our MBMMAX2H headliner bracket!

pdf/XMMAX206P-Visor-Light-Spec-Sheet.pdf
8-Diode Dash/Deck Light 8-Diode Dash/Deck Light

Two (2) TLED04B modules in a UV stabilized plastic housing that can be used as either a dash or deck light. Invert the winshield bracket to act as a rear deck or headliner bracket or use one of the many options to mount for other applications. See catalog and/or price guide for other mounting options. Available in cigar plug model only, cutting off of plug for hard-wire applications will not void warranty.

 

pdf/MMAX204P-Visor-Light-Spec-Sheet.pdf
Titan 6-Diode Dash Light Titan 6-Diode Dash Light

6 third generation diodes behind the Xtreme linear optics provide superior output from a tiny source. One piece construction eliminates any assembly, just plug it in and stick it to the windshield. The light module can be adjusted to accommodate the angle of most windshields.

pdf/Titan-LED-Dash-Light-Spec-Sheet.pdf
Titan 4-Diode Dash Light Titan 4-Diode Dash Light

No assembly required, a fixed housing with an adjustable light head accomodates most winshield angles.  

pdf/Titan-LED-Dash-Light-Spec-Sheet.pdf
Stealth Visor Interior Lightbar Stealth Visor Interior Lightbar

Perfect for slick-top or undercover vehicles, the SV series with Xtreme linear optics provide unrivaled front facing interior lighting. Available in a 40 or 60 diode models, each unit comes standard with a universal mounting kit.*

*Universal mounting kit not guaranteed to work in all vehicles.

*Vehicle specific mounts are available, please call or email info@brookingindustries.com for full offering.

pdf/Stealth-Visor-Interior-Lightbar-Spec-Sheet.pdf
Work Lights
4-Diode Square Work Light (3200 lumens) 4-Diode Square Work Light (3200 lumens)

3200 lumens and rugged construction results in an affordable upgrade to standard lighting on anything from off-road vehicles to marine crafts to law enforcement vehicles.

Each unit comes with waterproof connectors, bail bracket and mounting hardware.

pdf/WLD6B074-00-Square-4-Diode-LED-Work-Light-Spec-Sheet.pdf
4-Diode Square Work Light (500 lumens) 4-Diode Square Work Light (500 lumens)

An economical offering with huge output. Though the lumen count is less than our other offerings (500 lm) this little guy is as rugged and bright as anything in its class.

pdf/WLH1B051-00-Square-4-Diode-LED-Work-Light-Spec-Sheet.pdf
4-Diode Round Work Light (900 lumens) 4-Diode Round Work Light (900 lumens)

An economical offering with huge output. Though the lumen count is less than our other offerings (900 lm) this little guy is as rugged and bright as anything in its class.

pdf/WLG1B051-00-Round-4-Diode-LED-Work-Light-Spec-Sheet.pdf
6-Diode Round Work Light (1900 lumens) 6-Diode Round Work Light (1900 lumens)

High power 1900 lumen LED Flood Light / work lamp! Each unit has 6 (3W) LED diodes, and impressive optics that provide huge output. Rugged die cast construction will stand up to the toughest of conditions.

pdf/WLB506FB-D7-Round-6-Diode-LED-Work-Light-Spec-Sheet.pdf
6-Diode Round Work Light (4800 lumens) 6-Diode Round Work Light (4800 lumens)

4800 lumens light up the night and rugged construction ensures years of service even in the toughest of conditions.

Perfect for search & rescue, snow plows or any application where standard vehicle lighting is not enough. Each unit comes with waterproof connectors, adjustable mounting bracket and hardware.

pdf/WLE6B076-00-Round-6-Diode-LED-Work-Light-Spec-Sheet.pdf
6-Diode Square Work Light (1900 lumens) 6-Diode Square Work Light (1900 lumens)

High power 1900 lumen LED Flood Light / work lamp! Each unit has 6 (3W) LED diodes, and impressive optics that provide huge output. Rugged die cast construction will stand up to the toughest of conditions.

Also available in round PN# WLB506FB-D7

pdf/WLC506FB-D7-Square-6-Diode-LED-Work-Light-Spec-Sheet.pdf