Page 25 - BrookingCatalog2019
P. 25

  >>SIRENS / SPEAKERS
   HHC-200 200W FULL FUNCTION LIGHT & SIREN CONTROLLER (HAND-HELD)
GENERAL SPECIFICATIONS
• Siren Standby Current: Less than 150mA
• Siren Frequency: 725Hz - 1587Hz
• Operating Temp: -25° to 60°(-15°F to + 140°F)
• Dimensions: HH Controller: 5.5"L x 2.2"W x 1.3"D
Amplifier: 8.2"W x 7.4"D x 2.72"H
• Light Controls: 3 progressive push buttons & 4 on/off
• Light Output Ratings: 10A fuse on each of the 8 outputs. (LV - 3 push buttons & SW - 4 push buttons) • Siren Connections: Positive x 2, Negative x 2, Speaker x 2, Radio x 2, Enable, Park Kill, Horn Ring
Transfer, Video Camera Trigger
• Removable 12 terminal block (Also location for video output)
• Light Control Connections: Power In 2-position screw terminal inputs
LV1, LV2, LV3 (push buttons) 3-position screw terminal outputs
SW1, SW2, SW3, SW4 (push buttons) 5-position screw terminal outputs
CMC-200 200W FULL FUNCTION LIGHT & SIREN CONTROLLER (CONSOLE MOUNT)
GENERAL SPECIFICATIONS
• Siren Standby Current: Less than 300mA
• Siren Frequency: 725Hz - 1587Hz
• Operating Temp: -30° to 65°(-22°F to + 150°F)
• Dimensions: Amplifier: 6.3"W x 2.8"H
• Light Controls: 4-position lever switch with position 3 siren activation
6 on/off lighted push-button switches with replaceable legends
• Light Output Ratings: 10A fuse on each of the 9 outputs. (6 push buttons, 3 lever positions) • Siren Connections: Positive x 2, Negative x 2, Speaker x 2, Radio x 2, Enable, HRT, Park Kill • Light Control Connections: Power In 2-position screw terminal inputs
LV1, LV2, LV3 (lever switch) 3-position screw terminal outputs SW1, SW2, SW3, SW4, SW5, SW6 (push buttons) 6-position screw terminal outputs
    COMMON FEATURES OF THE HHC-200 AND CMC-200 SIREN AMPLIFIERS
GENERAL SPECIFICATIONS
• Compliance: Meets SAE J1849 & CA Title XIII, ECE R10
• Input Voltage: 11-16 VDC (negative ground)
• Siren Input Current: 8.5Amps (@13.6VDC - single 100W speaker)
16 Amps (@13.6VDC - dual 100W speakers)
• Audio Frequency: 300Hz - 3kHz ± 3db
• Radio Output: 40 watts (@13.6VDC-single 100W speaker)
• Siren Output Power: 100 WATTS RMS MAX. (16VDC - single
100W speaker)
• Siren Output Power: 200 WATTS RMS MAX. (16VDC - dual
100W speakers)
FEATURES
• For use with one or two 100W siren speakers
• Noise canceling microphone
• LED back-lit buttons show green when off, red when activated / on • 260 adhesive button titles
• Quick disconnect block plugs promote ease of service and / or
replacement
• Momentary push-button Horn switch
• Momentary push-button Manual/Tone toggle switch
• HRT input programmable for positive or negative operation
• Park Kill input programmable for positive or negative latching Park
Kill operation
• Side DIP switch option selectors
  Tones /Cycle Rates
 Horn
 Wail
 Yelp
  Phaser
  Two-Tone
 Cycle Rates
  Composite (Constant)
  12CPM
  160CPM
   895CPM
   40CPM
  EMERGENCY VEHICLE EQUIPMENT - 2019 >>23
 




































   23   24   25   26   27