M18T

PERIMETER & HIDEAWAY LIGHTING

PRODUCT NUMBER: M18T-xxx: Replace “xxx” with preferred colors

FEATURES:

  • Wide angle output optics produce unrivaled off axis output.
  • Factory pre-set flash modes improve efficiency:
    • RED WIRE: Color 1 alternate Color 2
    • WHITE WIRE: Color 1, 2, 3 alternating (pursuit mode)
    • GREEN WIRE: Color 3 steady / scene / cruise
  • Compatible with most other Smart Systems (consult Brooking)
  • Low profile design promotes clean, streamlined aesthetics.
  • Black bezel included with each unit, white and chrome sold separately.
  • Programmable via new BlinkCast PC User Interface. Manual wire tapping programming also available.
  • Multi-unit synchronization in simultaneous or alternating flash
  • UV infused lenses are ultra-resistant to yellowing / cracking due to harsh weather / road conditions
  • Fully Weatherproof and vibration resistant design for external or internal use
  • Solid aluminum base facilitates efficient heat dissipation while also maximizing durability
  • Non-volatile memory recalls last flash pattern used at power up
  • Reverse polarity and load dump protection

GENERAL SPECIFICATIONS:

  • Compliance: SAE J595 Class1; SAE J845) Class 1; CA Title 13, IPX7; CISPRR 25
  • LED Count: 18 (6x6x6 interleaved
  • Flash Patterns: 28 (no split)
  • Operating Voltage: 12~24VDC
  • Avg. Current: 0.44A @12VDC / 0.22A @24VDC
  • Max. Current: 0.87A @12VDC / 0.44A @24VDC
  • Avg. Power: 5.2 Watts
  • Max. Power: 10.4 Watts
  • Wires: Black – GND: (9.84” / 20AWG)
    • Red – Warning Memory 1: (9.84” / 20AWG)
    • White – Warning Memory 2: (9.84” / 20AWG)
    • Green – Warning Memory 3: (9.84″ / 20AWG)
    • Yellow – Flash Pattern / Sync: (9.84″ / 20AWG)
  • Fuse Rating: 2A
  • Synchronization: Up to 20 units
  • LED Color: Amber, Blue, Green, Red, White
  • Lens Color: Clear
  • Storage Temp.: -40°F to +167°F
  • Working Temp.: -30°F to +149°F
  • Warranty: 5 Years

BLINKCAST MODULE

Save valuable time by using Brooking’s new BlinkCast User Interface.
Simply download the software to a PC and create settings (flash pattern, color mode, group / phase), upload them to the portable BlinkCast programming module, ultimately uploading them to the lighthead(s).
Each module is capable of storing up to 5 setting files.


*(1) BlinkCast module sent free of charge w/ 1st lighthead purchase



Let’s Optimize Your Fleet


Our Latest Articles