Home > Sirens and speakers > SDP212-H

200W Hand-Held, Fully Programmable Remote Full Function Light & Siren Controller


Product Number: SDP212-H


• Fully programmable / customizable via PC software:
• Button & Input style: Sustained, Momentary, Timed, etc.
• Button Interlink, Interlock & Output port.
• Tone selection: Primary, Override, Mixed, Hands-free
• Multi-press function
• 15 button hand-held controller w/ built-in mic, button buzzer, 6 LED traffic arrow indicator &
power magnet mounting mechanism.
• 12 Relay outputs: (3) 15A, (3) 10A, (2) 2A, (4) 0.25A) and (1) dry contact relay output.
• 4 Positive or negative activated logic inputs and 1 voltage variable analog input.
• Low amp draw, Class D amplifier produces an incredibly clean, crisp tone & LOUD output when paired with JS-100 speaker
• 200W amplifier supports one or two 100W speakers (11 Ohm).
• 2 back lighting modes (normal & covert).
• Selectable tones: Wail, Yelp, Phaser / Piercer, Hi-Lo, Mechanical, European tones, etc.
• Heavy duty power and output connector blocks with easily accessible fuses.
• Radio RE-Broadcast (RRB) for audio replay.
• Record-n-Play: Record instantly replayable messages (up to 20 seconds).
• “Mix Tone” function allows multi-tone / multi-speaker effect.
• Voltage detection: Programmable for automatic low voltage ection.

Compliance: SAE J849 EVS1; ECE R10; CISPR 25
Input Voltage: 12~24VDC
Standby Current: 0mA (w/o IGN wire / <0.35A (w/ IGN wire) Avg. Current: 8.5A @ 12VDC / 4A @ 24VDC
Max. Current: 20A @ 12VDC / 10A @ 24VDC (w/o light control outputs) 100A @ 12VDC / 50A @ 24VDC (w/ light control
Siren Output Power: 200W (11W speaker x2) 11Ohms Siren Output Load: 100W-ACR 11Ohms
Siren Frequency: Varies by tone
Operating Temp: 86F to 149F
I/O: Power, IGN (ignition), Speaker Output x2, High Current Output x3, Mid/Low Current Output x9, Logic Input x4, Voltage Variable Analog Input x1, Radio Audio Input, Microphone TRS (optional), Controller port, PC Link USB Port
Light Controls: (3) 15A, (3) 10A, (2) 2A, (4) 0.25A light control outputs
Fuse Ratings: Blade Fuse: (1) 30A, (3) 15A, (3) 10A, (2) 2A.
Resettable Fuse: (4) 0.25A
Cable lengths: Connector Harness x5: 11.8″, Controller
Extension Cord: 13.1′

Let’s Optimize Your Fleet

Request Our Catalog